Loops
=====

Often you'll want to do many things in one task, such as create a lot of users, install a lot of packages, or
repeat a polling step until a certain result is reached.

This chapter is all about how to use loops in playbooks.

.. contents:: Topics

.. _standard_loops:

Standard Loops
``````````````

To save some typing, repeated tasks can be written in short-hand like so::

    - name: add several users
      user: name={{ item }} state=present groups=wheel
      with_items:
         - testuser1
         - testuser2

If you have defined a YAML list in a variables file, or the 'vars' section, you can also do::

    with_items: "{{somelist}}"

The above would be the equivalent of::

    - name: add user testuser1
      user: name=testuser1 state=present groups=wheel
    - name: add user testuser2
      user: name=testuser2 state=present groups=wheel

The yum and apt modules use with_items to execute fewer package manager transactions.

Note that the types of items you iterate over with 'with_items' do not have to be simple lists of strings.
If you have a list of hashes, you can reference subkeys using things like::

    - name: add several users
      user: name={{ item.name }} state=present groups={{ item.groups }}
      with_items:
        - { name: 'testuser1', groups: 'wheel' }
        - { name: 'testuser2', groups: 'root' }

Also be aware that when combining `when` with `with_items` (or any other loop statement), the `when` statement is processed separately for each item. See :ref:`the_when_statement` for an example.

.. _nested_loops:

Nested Loops
````````````

Loops can be nested as well::

    - name: give users access to multiple databases
      mysql_user: name={{ item[0] }} priv={{ item[1] }}.*:ALL append_privs=yes password=foo
      with_nested:
        - [ 'alice', 'bob' ]
        - [ 'clientdb', 'employeedb', 'providerdb' ]

As with the case of 'with_items' above, you can use previously defined variables.::

    - name: here, 'users' contains the above list of employees
      mysql_user: name={{ item[0] }} priv={{ item[1] }}.*:ALL append_privs=yes password=foo
      with_nested:
        - "{{users}}"
        - [ 'clientdb', 'employeedb', 'providerdb' ]

.. _looping_over_hashes:

Looping over Hashes
```````````````````

.. versionadded:: 1.5

Suppose you have the following variable::

    ---
    users:
      alice:
        name: Alice Appleworth
        telephone: 123-456-7890
      bob:
        name: Bob Bananarama
        telephone: 987-654-3210

And you want to print every user's name and phone number.  You can loop through the elements of a hash using ``with_dict`` like this::

    tasks:
      - name: Print phone records
        debug: msg="User {{ item.key }} is {{ item.value.name }} ({{ item.value.telephone }})"
        with_dict: "{{users}}"

.. _looping_over_fileglobs:

Looping over Files
``````````````````

``with_file`` iterates over the content of a list of files, `item` will be set to the content of each file in sequence.  It can be used like this::

    ---
    - hosts: all

      tasks:

        # emit a debug message containing the content of each file.
        - debug:
            msg: "{{item}}"
          with_file:
            - first_example_file
            - second_example_file

Assuming that ``first_example_file`` contained the text "hello" and ``second_example_file`` contained the text "world", this would result in::

    TASK [debug msg={{item}}] ******************************************************
    ok: [localhost] => (item=hello) => {
        "item": "hello", 
        "msg": "hello"
    }
    ok: [localhost] => (item=world) => {
        "item": "world", 
        "msg": "world"
    }

Looping over Fileglobs
``````````````````````

``with_fileglob`` matches all files in a single directory, non-recursively, that match a pattern.  It can
be used like this::

    ---
    - hosts: all

      tasks:

        # first ensure our target directory exists
        - file: dest=/etc/fooapp state=directory

        # copy each file over that matches the given pattern
        - copy: src={{ item }} dest=/etc/fooapp/ owner=root mode=600
          with_fileglob:
            - /playbooks/files/fooapp/*

.. note:: When using a relative path with ``with_fileglob`` in a role, Ansible resolves the path relative to the `roles/<rolename>/files` directory.

Looping over Parallel Sets of Data
``````````````````````````````````

.. note:: This is an uncommon thing to want to do, but we're documenting it for completeness.  You probably won't be reaching for this one often.

Suppose you have the following variable data was loaded in via somewhere::

    ---
    alpha: [ 'a', 'b', 'c', 'd' ]
    numbers:  [ 1, 2, 3, 4 ]

And you want the set of '(a, 1)' and '(b, 2)' and so on.   Use 'with_together' to get this::

    tasks:
        - debug: msg="{{ item.0 }} and {{ item.1 }}"
          with_together:
            - "{{alpha}}"
            - "{{numbers}}"

Looping over Subelements
````````````````````````

Suppose you want to do something like loop over a list of users, creating them, and allowing them to login by a certain set of
SSH keys.

How might that be accomplished?  Let's assume you had the following defined and loaded in via "vars_files" or maybe a "group_vars/all" file::

    ---
    users:
      - name: alice
        authorized:
          - /tmp/alice/onekey.pub
          - /tmp/alice/twokey.pub
        mysql:
            password: mysql-password
            hosts:
              - "%"
              - "127.0.0.1"
              - "::1"
              - "localhost"
            privs:
              - "*.*:SELECT"
              - "DB1.*:ALL"
      - name: bob
        authorized:
          - /tmp/bob/id_rsa.pub
        mysql:
            password: other-mysql-password
            hosts:
              - "db1"
            privs:
              - "*.*:SELECT"
              - "DB2.*:ALL"

It might happen like so::

    - user: name={{ item.name }} state=present generate_ssh_key=yes
      with_items: "{{users}}"

    - authorized_key: "user={{ item.0.name }} key='{{ lookup('file', item.1) }}'"
      with_subelements:
         - users
         - authorized

Given the mysql hosts and privs subkey lists, you can also iterate over a list in a nested subkey::

    - name: Setup MySQL users
      mysql_user: name={{ item.0.name }} password={{ item.0.mysql.password }} host={{ item.1 }} priv={{ item.0.mysql.privs | join('/') }}
      with_subelements:
        - users
        - mysql.hosts

Subelements walks a list of hashes (aka dictionaries) and then traverses a list with a given (nested sub-)key inside of those
records.

Optionally,  you can add a third element to the subelements list, that holds a
dictionary of flags. Currently you can add the 'skip_missing' flag. If set to
True, the lookup plugin will skip the lists items that do not contain the given
subkey. Without this flag, or if that flag is set to False, the plugin will
yield an error and complain about the missing subkey.

The authorized_key pattern is exactly where it comes up most.

.. _looping_over_integer_sequences:

Looping over Integer Sequences
``````````````````````````````

``with_sequence`` generates a sequence of items in ascending numerical order. You
can specify a start, end, and an optional step value.

Arguments should be specified in key=value pairs.  If supplied, the 'format' is a printf style string.

Numerical values can be specified in decimal, hexadecimal (0x3f8) or octal (0600).
Negative numbers are not supported.  This works as follows::

    ---
    - hosts: all

      tasks:

        # create groups
        - group: name=evens state=present
        - group: name=odds state=present

        # create some test users
        - user: name={{ item }} state=present groups=evens
          with_sequence: start=0 end=32 format=testuser%02x

        # create a series of directories with even numbers for some reason
        - file: dest=/var/stuff/{{ item }} state=directory
          with_sequence: start=4 end=16 stride=2

        # a simpler way to use the sequence plugin
        # create 4 groups
        - group: name=group{{ item }} state=present
          with_sequence: count=4

.. _random_choice:

Random Choices
``````````````

The 'random_choice' feature can be used to pick something at random.  While it's not a load balancer (there are modules
for those), it can somewhat be used as a poor man's loadbalancer in a MacGyver like situation::

    - debug: msg={{ item }}
      with_random_choice:
         - "go through the door"
         - "drink from the goblet"
         - "press the red button"
         - "do nothing"

One of the provided strings will be selected at random.  

At a more basic level, they can be used to add chaos and excitement to otherwise predictable automation environments.

.. _do_until_loops:

Do-Until Loops
``````````````

.. versionadded: 1.4

Sometimes you would want to retry a task until a certain condition is met.  Here's an example::
   
    - action: shell /usr/bin/foo
      register: result
      until: result.stdout.find("all systems go") != -1
      retries: 5
      delay: 10

The above example run the shell module recursively till the module's result has "all systems go" in its stdout or the task has
been retried for 5 times with a delay of 10 seconds. The default value for "retries" is 3 and "delay" is 5.

The task returns the results returned by the last task run. The results of individual retries can be viewed by -vv option.
The registered variable will also have a new key "attempts" which will have the number of the retries for the task.

.. _with_first_found:

Finding First Matched Files
```````````````````````````

.. note:: This is an uncommon thing to want to do, but we're documenting it for completeness.  You probably won't be reaching for this one often.

This isn't exactly a loop, but it's close.  What if you want to use a reference to a file based on the first file found
that matches a given criteria, and some of the filenames are determined by variable names?  Yes, you can do that as follows::

    - name: INTERFACES | Create Ansible header for /etc/network/interfaces
      template: src={{ item }} dest=/etc/foo.conf
      with_first_found:
        - "{{ansible_virtualization_type}}_foo.conf"
        - "default_foo.conf"

This tool also has a long form version that allows for configurable search paths.  Here's an example::

    - name: some configuration template
      template: src={{ item }} dest=/etc/file.cfg mode=0444 owner=root group=root
      with_first_found:
        - files:
           - "{{inventory_hostname}}/etc/file.cfg"
          paths:
           - ../../../templates.overwrites
           - ../../../templates
        - files:
            - etc/file.cfg
          paths:
            - templates

.. _looping_over_the_results_of_a_program_execution:

Iterating Over The Results of a Program Execution
`````````````````````````````````````````````````

.. note:: This is an uncommon thing to want to do, but we're documenting it for completeness.  You probably won't be reaching for this one often.

Sometimes you might want to execute a program, and based on the output of that program, loop over the results of that line by line.
Ansible provides a neat way to do that, though you should remember, this is always executed on the control machine, not the local
machine::

    - name: Example of looping over a command result
      shell: /usr/bin/frobnicate {{ item }}
      with_lines: /usr/bin/frobnications_per_host --param {{ inventory_hostname }}

Ok, that was a bit arbitrary.  In fact, if you're doing something that is inventory related you might just want to write a dynamic
inventory source instead (see :doc:`intro_dynamic_inventory`), but this can be occasionally useful in quick-and-dirty implementations.

Should you ever need to execute a command remotely, you would not use the above method.  Instead do this::

    - name: Example of looping over a REMOTE command result
      shell: /usr/bin/something
      register: command_result

    - name: Do something with each result
      shell: /usr/bin/something_else --param {{ item }}
      with_items: "{{command_result.stdout_lines}}"

.. _indexed_lists:

Looping Over A List With An Index
`````````````````````````````````

.. note:: This is an uncommon thing to want to do, but we're documenting it for completeness.  You probably won't be reaching for this one often.

.. versionadded: 1.3

If you want to loop over an array and also get the numeric index of where you are in the array as you go, you can also do that.
It's uncommonly used::

    - name: indexed loop demo
      debug: msg="at array position {{ item.0 }} there is a value {{ item.1 }}"
      with_indexed_items: "{{some_list}}"

.. _using_ini_with_a_loop:

Using ini file with a loop
``````````````````````````
.. versionadded: 2.0

The ini plugin can use regexp to retrieve a set of keys. As a consequence, we can loop over this set. Here is the ini file we'll use::

    [section1]
    value1=section1/value1
    value2=section1/value2

    [section2]
    value1=section2/value1
    value2=section2/value2

Here is an example of using ``with_ini``::

    - debug: msg="{{item}}"
      with_ini: value[1-2] section=section1 file=lookup.ini re=true

And here is the returned value::

    {
          "changed": false, 
          "msg": "All items completed", 
          "results": [
              {
                  "invocation": {
                      "module_args": "msg=\"section1/value1\"", 
                      "module_name": "debug"
                  }, 
                  "item": "section1/value1", 
                  "msg": "section1/value1", 
                  "verbose_always": true
              }, 
              {
                  "invocation": {
                      "module_args": "msg=\"section1/value2\"", 
                      "module_name": "debug"
                  }, 
                  "item": "section1/value2", 
                  "msg": "section1/value2", 
                  "verbose_always": true
              }
          ]
      }

.. _flattening_a_list:

Flattening A List
`````````````````

.. note:: This is an uncommon thing to want to do, but we're documenting it for completeness.  You probably won't be reaching for this one often.

In rare instances you might have several lists of lists, and you just want to iterate over every item in all of those lists.  Assume
a really crazy hypothetical datastructure::

    ----
    # file: roles/foo/vars/main.yml
    packages_base:
      - [ 'foo-package', 'bar-package' ]
    packages_apps:
      - [ ['one-package', 'two-package' ]]
      - [ ['red-package'], ['blue-package']]

As you can see the formatting of packages in these lists is all over the place.  How can we install all of the packages in both lists?::

    - name: flattened loop demo
      yum: name={{ item }} state=installed 
      with_flattened:
         - "{{packages_base}}"
         - "{{packages_apps}}"

That's how!

.. _using_register_with_a_loop:

Using register with a loop
``````````````````````````

When using ``register`` with a loop the data structure placed in the variable during a loop, will contain a ``results`` attribute, that is a list of all responses from the module.

Here is an example of using ``register`` with ``with_items``::

    - shell: echo "{{ item }}"
      with_items:
        - one
        - two
      register: echo

This differs from the data structure returned when using ``register`` without a loop::

    {
        "changed": true,
        "msg": "All items completed",
        "results": [
            {
                "changed": true,
                "cmd": "echo \"one\" ",
                "delta": "0:00:00.003110",
                "end": "2013-12-19 12:00:05.187153",
                "invocation": {
                    "module_args": "echo \"one\"",
                    "module_name": "shell"
                },
                "item": "one",
                "rc": 0,
                "start": "2013-12-19 12:00:05.184043",
                "stderr": "",
                "stdout": "one"
            },
            {
                "changed": true,
                "cmd": "echo \"two\" ",
                "delta": "0:00:00.002920",
                "end": "2013-12-19 12:00:05.245502",
                "invocation": {
                    "module_args": "echo \"two\"",
                    "module_name": "shell"
                },
                "item": "two",
                "rc": 0,
                "start": "2013-12-19 12:00:05.242582",
                "stderr": "",
                "stdout": "two"
            }
        ]
    }

Subsequent loops over the registered variable to inspect the results may look like::

    - name: Fail if return code is not 0
      fail:
        msg: "The command ({{ item.cmd }}) did not have a 0 return code"
      when: item.rc != 0
      with_items: "{{echo.results}}"



.. _loops_and_includes:

Loops and Includes

``````````````````

In 2.0 you are able to use `with_` loops and task includes (but not playbook includes), this adds the ability to loop over the set of tasks in one shot.
There are a couple of things that you need to keep in mind, a included task that has it's own `with_` loop will overwrite the value of the special `item` variable.
So if you want access to both the include's `item` and the current task's `item` you should use `set_fact` to create a alias to the outer one.::


    - include: test.yml
      with_items:
        - 1
        - 2
        - 3

in test.yml::

    - set_fact: outer_loop="{{item}}"

    - debug: msg="outer item={{outer_loop}} inner item={{item}}"
      with_items:
        - a
        - b
        - c


.. _writing_your_own_iterators:

Writing Your Own Iterators
``````````````````````````

While you ordinarily shouldn't have to, should you wish to write your own ways to loop over arbitrary datastructures, you can read :doc:`developing_plugins` for some starter
information.  Each of the above features are implemented as plugins in ansible, so there are many implementations to reference.

.. seealso::

   :doc:`playbooks`
       An introduction to playbooks
   :doc:`playbooks_roles`
       Playbook organization by roles
   :doc:`playbooks_best_practices`
       Best practices in playbooks
   :doc:`playbooks_conditionals`
       Conditional statements in playbooks
   :doc:`playbooks_variables`
       All about variables
   `User Mailing List <http://groups.google.com/group/ansible-devel>`_
       Have a question?  Stop by the google group!
   `irc.freenode.net <http://irc.freenode.net>`_
       #ansible IRC chat channel


